Timeouts

Ambassador Edge Stack enables you to control timeouts in several different ways.

Request Timeout: timeout_ms

timeout_ms is the end-to-end timeout for an entire user-level transaction in milliseconds. It begins after the full incoming request is received up until the full response stream is returned to the client. This timeout includes all retries. It can be disabled by setting the value to 0.

Default: 3000

Idle Timeout: idle_timeout_ms

idle_timeout_ms controls how long a connection should remain open when no traffic is being sent through the connection. idle_timeout_ms is distinct from timeout_ms, as the idle timeout applies on either down or upstream request events and is reset every time an encode/decode event occurrs or data is processed for the stream. idle_timeout_ms operates on a per-route basis and will overwrite behavior of the cluster_idle_timeout_ms. If not set, Ambassador Edge Stack will default to the value set by cluster_idle_timeout_ms. It can be disabled by setting the value to 0.

Cluster Idle Timeout: cluster_idle_timeout_ms

cluster_idle_timeout_ms controls how long a connection stream will remain open if there are no active requests. This timeout operates based on outgoing requests to upstream services. It can be disabled by setting the value to 0.

Default: 3600000 (1 hour).

Connect Timeout: connect_timeout_ms

connect_timeout_ms sets the connection-level timeout for Ambassador Edge Stack to an upstream service at the network layer. This timeout runs until Ambassador can verify that a TCP connection has been established, including the TLS handshake. This timeout cannot be disabled.

Default: 3000

Module Only

Listener Idle Timeout: listener_idle_timeout_ms

listener_idle_timeout_ms controls how long a connection stream will remain open if there are no active requests. This timeout operates based on incoming requests to the listener. It can be disabled by setting the value to 0. Caution Disabling this timeout increases the likelihood of stream leaks due to missed FINs in the TCP connection.

Default: 30000

Example

The various timeouts are applied to a Mapping resource and can be combined.